Front Page   

Navigation Page

RIG SUPPLY SERVICES US Inc.

. From Concept to Design

. Manufacturing

. Installation

. Commissioning

. Global Capability

. Technical Support

. Full Product Support

. Surveying Services

RSS offer a Global capability and support all products & services.

RSS products are  guaranteed for quality and reliability.

Rental Services are available.

Please contact us for more information.

Email:sales@rssusservices.com

For local support please refer to Contact page information.

MUD GAS SEPARATORS - MGS

THE RSSTRIFIO-30/40/50 Mud Gas Separators are self contained which allows for easy mobilization. It is ideal for use where drilling is likely to encounter large volumes of gas, sour gas or when an operator is drilling with an under-balanced mud column. The MUD GAS SEPARATOR is primarily used to separate and safely vent from the active mud system large pockets of free gas that may include toxic gases such as hydrogen sulphide.

  30" diameter by 108" seam to seam vessel equipped with internal baffles, 3" mud  inlet, 8" mud outlet with "J" tube design

  Manages approximately 650 GPM, 7.6 MMSCF/Day, and 22,286 BBL/Day. Unit is designed to mount on top of the tank and secured into position.  This allows the unit to be lowered to the bottom of the mud tank for transportation.

Note:

MGS can be manufactured in accordance with the following - ASME Section VIII, Division I for Lethal Service and NACE - MR0175 for H2S Service, PED and NORSOK. Maximum operating pressure Is 25 psi at 350 deg F Minimum operating temperature is-58 deg F.

   CE Conformity - Directive 97/23/EC & Directive 97/23/EC

   Standard Dimensions:

         Height: 8'5"

         Weight: 2650 lbs.

CONNECTIONS:

1    N1 MUD INLET / INSPECTION 6 150 ANSI RF

2    N2 GAS DISCHARGE / INSPECTION 8 150 ANSI RF

3    N3 MUD DISCHARGE / INSPECTION 8 150 ANSI RF

4    N4 SENSOR PORT / INSPECTION 2 150 ANSI RF

5    N5 MUD INLET 2 15,000 FIG 1502 or 2202 as required

RSS can supply Vertical and Horizontal Separators to suite each customers individual requirements and have recently completed and delivered to vessels for Hyundai.

Please contact us to discuss your particular needs a member of our technical team will be happy to assist. Toll Free: 1 866 447 8777  

MGS Drawing

Rig Supply Services are part of the Risk Group of Companies

Risk Group of  Companies -

Risk Safety Systems US

Consolidated Risk

CODER ED™

MGS Specification